$45.00
The Mini Vapor Pin® is for use in any setting. They are ideal with slabs as thin as 2 inches. The Mini Vapor Pin® is installed in the flush-mount position after drilling only a 5/8-inch hole. Mini Vapor Pins® are sold as a complete set, which eliminates the need for separate covers. The Mini Vapor Pin® is designed for permanent installation and cannot be removed and reused, they are constructed of anodized aluminum, making them very economical. The FLX-VPTM Barb and Mini Vapor Pin® secure cover both have O-Rings for the seal.O-ring, Silicone Sleeve, and Mini Vapor Pin® Secure Cover with O-ring. Drill a 5/8-inch (16mm) diameter hole through the slab and approximately 1-inch (25mm) into the underlying soil to form a void. Hole must be 5/8-inch (16mm) in diameter to ensure a seal. The drilled hole must be perpendicular to the slab for the mandatory Secure Cover to seat correctly. It is strongly recommended that the Mini-Vapor Pin® drilling guide be used for this purpose SET INCLUDES: Mini Vapor Pin®, FLX-VPTM Barb with O-ring, Silicone Sleeve, and Mini Vapor Pin® Secure Cover with O-ring.
The Mini Vapor Pin® Sampling Device was created for the situations in which the customer would need a sampling device for thin slab situations; however, it can also be used in all other slab depths.
The Mini Vapor Pin® Sampling Device Set Includes:
| Weight | 0.075 lbs |
|---|---|
| Dimensions | 3 × 0.2 × 4 in |
